Hydraulic line repair data

Hitachi ZX135US Control Lever Hose List

Hitachi ZX135US Control Lever currently has 8 published hose records for checking length, hose specification, left and right fittings, part number, and diagram pipe number.

Hoses: 8 records
Full specifications: 8 records
Systems: 1 systems
Length range: 350–3,850 mm

Hose repair details

Hose Length and Fitting List

Diagram Pipe No. 9

4436314

Installation route: 左手柄~中转接头

Length: 3,800 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 8

4436317

Installation route: 右手柄~中转接头

Length: 3,250 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 3

4441404

Installation route: 模式转换阀~中转接头

Length: 450 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 7

4436316

Installation route: 右手柄~中转接头

Length: 3,250 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 8

4436313

Installation route: 左手柄~中转接头

Length: 3,800 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 9

4436319

Installation route: 右手柄~中转接头

Length: 3,250 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 28

4451995

Installation route: 中转接头~分配阀后

Length: 350 mm
Specification: DN6;1SN-04;22.5MPa
Left fitting: 美制内螺纹74°内锥
Right fitting: 美制内螺纹74°内锥

View full repair specifications

Diagram Pipe No. 7

4436312

Installation route: 左手柄~中转接头

Length: 3,850 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Hitachi ZX135US Control Lever?

There are 8 published records. 8 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Hitachi ZX135US Control Lever?

Based on published records with valid lengths, the range is 350–3,850 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Hitachi ZX135US Control Lever?

The most frequent raw specifications in the current published records are: DN10;1SN-6;7Mpa (7 records), DN6;1SN-04;22.5MPa (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Hitachi ZX135US Control Lever?

Each record keeps the left and right fitting descriptions separate. Current examples: 4436314: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥; 4436317: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥; 4441404: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Hitachi ZX135US Control Lever hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 9 (4436314), Pipe No. 8 (4436317), Pipe No. 3 (4441404), Pipe No. 7 (4436316). Open a record to compare its installation position with the linked manual page.