Hydraulic line repair data

Hitachi EX100WD Control Lever Hose List

Hitachi EX100WD Control Lever currently has 9 published hose records for checking length, hose specification, left and right fittings, part number, and diagram pipe number.

Hoses: 9 records
Full specifications: 9 records
Systems: 1 systems
Length range: 450–2,050 mm

Hose repair details

Hose Length and Fitting List

Diagram Pipe No. 48

4208430

Installation route: 右手柄~接线板(中转接头)

Length: 1,800 mm
Specification: DN10;1层纤维-6;14MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 49

4208431

Installation route: 右手柄~接线板(中转接头)

Length: 1,950 mm
Specification: DN10;1层纤维-6;14MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 50

4208432

Installation route: 右手柄~中转接头

Length: 2,050 mm
Specification: DN10;1层纤维-6;14MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 45

4208416

Installation route: 中转接头~分配阀下

Length: 700 mm
Specification: DN10;1层纤维-6;14MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 8

4217324

Installation route: 中转接头~过渡阀块(液压油箱)

Length: 750 mm
Specification: DN10;1层纤维-6;14MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 40

4203028

Installation route: 右手柄~进回油阀

Length: 1,100 mm
Specification: DN10;1层纤维-6;14MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 38

4208423

Installation route: 右手柄~进回油阀

Length: 1,150 mm
Specification: DN10;1层纤维-6;14MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 47

4208429

Installation route: 右手柄~中转接头

Length: 1,850 mm
Specification: DN10;1层纤维-6;14MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 6

4217325

Installation route: 中转接头~过渡阀块(液压油箱)

Length: 450 mm
Specification: DN10;1层纤维-6;14MPa
Left fitting: 美制内螺纹37°内锥
Right fitting: 90°美制内螺纹37°内锥

View full repair specifications

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Hitachi EX100WD Control Lever?

There are 9 published records. 9 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Hitachi EX100WD Control Lever?

Based on published records with valid lengths, the range is 450–2,050 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Hitachi EX100WD Control Lever?

The most frequent raw specifications in the current published records are: DN10;1层纤维-6;14MPa (9 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Hitachi EX100WD Control Lever?

Each record keeps the left and right fitting descriptions separate. Current examples: 4208430: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥; 4208431: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥; 4208432: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Hitachi EX100WD Control Lever hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 48 (4208430), Pipe No. 49 (4208431), Pipe No. 50 (4208432), Pipe No. 45 (4208416). Open a record to compare its installation position with the linked manual page.