Hydraulic line repair data

Hitachi ZX225USLC Control Lever Hose List

Hitachi ZX225USLC Control Lever currently has 5 published hose records for checking length, hose specification, left and right fittings, part number, and diagram pipe number.

Hoses: 5 records
Full specifications: 5 records
Systems: 1 systems
Length range: 450–1,200 mm

Hose repair details

Hose Length and Fitting List

Diagram Pipe No. 2A

4456707

Installation route: 模式转换阀~中转接头

Length: 1,200 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 1

4427111

Installation route: 中转接头~分配阀右

Length: 700 mm
Specification: DN6;1SN-04;22.5MPa
Left fitting: 美制内螺纹74°内锥
Right fitting: 90°美制内螺纹74°内锥

View full repair specifications

Diagram Pipe No. 3

4481999

Installation route: 模式转换阀~中转接头

Length: 550 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 6A

4456714

Installation route: 模式转换阀~中转接头

Length: 450 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 0A

4456705

Installation route: 模式转换阀~中转接头

Length: 600 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Hitachi ZX225USLC Control Lever?

There are 5 published records. 5 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Hitachi ZX225USLC Control Lever?

Based on published records with valid lengths, the range is 450–1,200 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Hitachi ZX225USLC Control Lever?

The most frequent raw specifications in the current published records are: DN10;1SN-6;7Mpa (4 records), DN6;1SN-04;22.5MPa (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Hitachi ZX225USLC Control Lever?

Each record keeps the left and right fitting descriptions separate. Current examples: 4456707: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥; 4427111: left 美制内螺纹74°内锥; right 90°美制内螺纹74°内锥; 4481999: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Hitachi ZX225USLC Control Lever hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 2A (4456707), Pipe No. 1 (4427111), Pipe No. 3 (4481999), Pipe No. 6A (4456714). Open a record to compare its installation position with the linked manual page.