Reduce offcuts
One-dimensional hose cutting optimizer
Enter the stock length and every required cut. The calculator groups cuts into a practical plan and shows stock count, material use, and waste.
1. Enter material and cuts
All dimensions are millimetres.
2. Cutting plan
Optimal stock count confirmed.
Best practical plan found. A lower-waste arrangement may still exist for this large job.
- Stock pieces
- 0
- Material used
- 0 mm
- Total waste
- 0 mm
- Yield
- 0%
Before cutting
Confirm whether your measured hose length is cut length or finished assembly length. Add machine-specific trim, crimp allowance, and fitting insertion depth before using this plan.