Hydraulic line repair data

Doosan DX160LC-3 Control Lever Hose List

Doosan DX160LC-3 Control Lever currently has 6 published hose records for checking length, hose specification, left and right fittings, part number, and diagram pipe number.

Hoses: 6 records
Full specifications: 6 records
Systems: 1 systems
Length range: 1,670–2,060 mm

Hose repair details

Hose Length and Fitting List

Diagram Pipe No. 4

DS2113003

Installation route: 左手柄2口~模式转换阀D2口

Length: 1,950 mm
Specification: DN10;1SN-06;18MPa
Left fitting: British female thread, 60° external cone seatOriginal Chinese: 英制内螺纹60°外锥
Right fitting: 75°英制内螺纹60°外锥

View full repair specifications

Diagram Pipe No. 16

DS2113059

Installation route: 左手柄P口~进回油阀P口

Length: 1,670 mm
Specification: DN10;1SN-06;18MPa
Left fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting: 75°美制内螺纹平面密封

View full repair specifications

Diagram Pipe No. 17

DS2113059

Installation route: 右手柄T口~进回油阀T口

Length: 1,670 mm
Specification: DN10;1SN-06;18MPa
Left fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting: 75°美制内螺纹平面密封

View full repair specifications

Diagram Pipe No. 13

DS2113005

Installation route: 右手柄P口~进回油阀P口

Length: 1,700 mm
Specification: DN10;1SN-06;18MPa
Left fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting: 75°美制内螺纹平面密封

View full repair specifications

Diagram Pipe No. 4

DS2113007

Installation route: 左手柄2口~中转接头A4口

Length: 2,060 mm
Specification: DN10;1SN-06;18MPa
Left fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting: 70°美制内螺纹平面密封

View full repair specifications

Diagram Pipe No. 3

DS2113056

Installation route: 左手柄4口~模式转换阀A2口

Length: 1,870 mm
Specification: DN10;1SN-06;18MPa
Left fitting: American female thread, flat-face sealOriginal Chinese: 美制内螺纹平面密封
Right fitting: 70°美制内螺纹平面密封

View full repair specifications

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Doosan DX160LC-3 Control Lever?

There are 6 published records. 6 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Doosan DX160LC-3 Control Lever?

Based on published records with valid lengths, the range is 1,670–2,060 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Doosan DX160LC-3 Control Lever?

The most frequent raw specifications in the current published records are: DN10;1SN-06;18MPa (6 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Doosan DX160LC-3 Control Lever?

Each record keeps the left and right fitting descriptions separate. Current examples: DS2113003: left British female thread, 60° external cone seat; right 75°英制内螺纹60°外锥; DS2113059: left American female thread, flat-face seal; right 75°美制内螺纹平面密封; DS2113059: left American female thread, flat-face seal; right 75°美制内螺纹平面密封. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Doosan DX160LC-3 Control Lever hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 4 (DS2113003), Pipe No. 16 (DS2113059), Pipe No. 17 (DS2113059), Pipe No. 13 (DS2113005). Open a record to compare its installation position with the linked manual page.