Hydraulic line repair data
Doosan DX160LC-3 currently has 51 published hose records for checking length, hose specification, left and right fittings, part number, and diagram pipe number.
Hose repair details
Showing 36 representative records. Return to the finder for a more specific search.
Diagram Pipe No. 3
Installation route: Right boom-cylinder grease lineOriginal Chinese: 右大臂油缸黄油管
Diagram Pipe No. 7
Installation route: Right boom-cylinder grease lineOriginal Chinese: 右大臂油缸黄油管
Diagram Pipe No. 5
Installation route: Left boom-cylinder grease lineOriginal Chinese: 左大臂油缸黄油管
Diagram Pipe No. 14
Installation route: Swivel joint → travel motorOriginal Chinese: 回转接头~行走马达
Diagram Pipe No. 6
Installation route: Two-piece boom grease lineOriginal Chinese: 分节大臂黄油管
Narrow the selection
Based on current published data
Questions appear only when a published record or linked PDF page provides the answer.
The current published data covers 11 systems and 51 hose records. Systems with more listed records include: Boom Assembly (8 hoses), Swivel Joint (8 hoses), Grease Lines (8 hoses), Control Valve (7 hoses), Control Lever (6 hoses), Attachments (5 hoses).
Based on published records with valid lengths, the range is 240–2,960 mm. Open the individual record to verify its installation position and both end fittings before fabrication.
The most frequent raw specifications in the current published records are: DN6;1SN-04;22.5MPa (19 records), DN10;1SN-06;18MPa (13 records), DN19;4SH-12;42MPa (11 records), DN13;1SN-08;16MPa (5 records), DN19;1SN-12;10.5MPa (2 records). Verify the specification together with length, pressure, and fitting details.
Each record keeps the left and right fitting descriptions separate. Current examples: DS20531097: left British female thread, 60° external cone seat; right British female thread, 60° external cone seat; DS2113003: left British female thread, 60° external cone seat; right 75°英制内螺纹60°外锥; DS2012424: left American female thread, flat-face seal; right 45°美制内螺纹平面密封. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.
Yes. Current examples with a diagram pipe number are: Pipe No. 3 (DS20531097), Pipe No. 4 (DS2113003), Pipe No. 39 (DS2012424), Pipe No. 201 (DS2121002). Open a record to compare its installation position with the linked manual page.
