Hydraulic line repair data

Hitachi ZX210W Control Lever Hose List

Hitachi ZX210W Control Lever currently has 9 published hose records for checking length, hose specification, left and right fittings, part number, and diagram pipe number.

Hoses: 9 records
Full specifications: 9 records
Systems: 1 systems
Length range: 700–3,800 mm

Hose repair details

Hose Length and Fitting List

Diagram Pipe No. 51

4467598

Installation route: 中转接头~电磁阀(踏板)

Length: 1,300 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 8

9224939

Installation route: 中转接头~分配阀下

Length: 1,000 mm
Specification: DN6;1SN-04;22.5MPa
Left fitting: 美制内螺纹74°内锥
Right fitting: 90°美制内螺纹74°内锥

View full repair specifications

Diagram Pipe No. 10

4470006

Installation route: 左手柄~中转接头

Length: 3,500 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 8

4436313

Installation route: 左手柄~中转接头

Length: 3,800 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 7

4436316

Installation route: 右手柄~中转接头

Length: 3,250 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 8

4436317

Installation route: 右手柄~中转接头

Length: 3,250 mm
Specification: DN10;1SN-6;7Mpa
Left fitting: 美制内螺纹37°内锥
Right fitting: 美制内螺纹37°内锥

View full repair specifications

Diagram Pipe No. 0

4427111

Installation route: 中转接头~分配阀右

Length: 700 mm
Specification: DN6;1SN-04;22.5MPa
Left fitting: 美制内螺纹74°内锥
Right fitting: 90°美制内螺纹74°内锥

View full repair specifications

Diagram Pipe No. 8A

4435036

Installation route: 中转接头~分配阀下

Length: 1,000 mm
Specification: DN6;1SN-04;22.5MPa
Left fitting: 美制内螺纹74°内锥
Right fitting: 90°美制内螺纹74°内锥

View full repair specifications

Diagram Pipe No. 10

4470006

Installation route: 左手柄~中转接头

Length: 3,500 mm
Specification: DN10;1SN-06;18MPa
Left fitting: 美制内螺纹74°内锥
Right fitting: 美制内螺纹74°内锥

View full repair specifications

Based on current published data

Common Repair Questions

Questions appear only when a published record or linked PDF page provides the answer.

How many hoses are currently listed for Hitachi ZX210W Control Lever?

There are 9 published records. 9 include a length, both end fittings, and a part number or diagram pipe number.

What is the hose length range for Hitachi ZX210W Control Lever?

Based on published records with valid lengths, the range is 700–3,800 mm. Open the individual record to verify its installation position and both end fittings before fabrication.

Which hose specifications are common for Hitachi ZX210W Control Lever?

The most frequent raw specifications in the current published records are: DN10;1SN-6;7Mpa (5 records), DN6;1SN-04;22.5MPa (3 records), DN10;1SN-06;18MPa (1 records). Verify the specification together with length, pressure, and fitting details.

How can I identify the left and right hose fittings for Hitachi ZX210W Control Lever?

Each record keeps the left and right fitting descriptions separate. Current examples: 4467598: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥; 9224939: left 美制内螺纹74°内锥; right 90°美制内螺纹74°内锥; 4470006: left 美制内螺纹37°内锥; right 美制内螺纹37°内锥. Open the exact part-number or pipe-number record; do not swap ends based on appearance alone.

Can I locate a Hitachi ZX210W Control Lever hose by diagram pipe number?

Yes. Current examples with a diagram pipe number are: Pipe No. 51 (4467598), Pipe No. 8 (9224939), Pipe No. 10 (4470006), Pipe No. 8 (4436313). Open a record to compare its installation position with the linked manual page.